-Do you know if you use fake 5g antenna,5g signal booster will not work perfectly even no effect.In this case,you will lose the money of 5g signal booster and 5g antenna.
-Callboost 5g wide band antenna support 4X4 Mimo,support 2g 3g 4g 5g system,wide frequency range 617~6000Mhz,covers all 5g operators' frequency bands. Callboost use Chinese the newest 5g commucation technology,only we can do that.
-Callboost manufacturer is major in signal booster and antenna over 20 years.Our factory have Strict production quality control all the time.
-Callboost 5g MIMO antenna apply Chinese the latest 5g communication technology,MIMO played a decisive role.It can improve the 5g mobile cell phone internet speed at least double level.Phone users want to download a 5GB movie only a few seconds,but other normal 5g antenna they need ten minutes.This is why everyone wants Callboost 5G MIMO antenna.
-Callboost 5g MIMO antenna can be used in 2G/3G/4G/5G system at the same time,but other 5g antenna only can support 5g frequency.When your 5g mobile phone wants to enhance the 4g 5g signal at the same time,you will find that other supplier's 5g antenna cannot be achieved at all.You should install two antennas,one is support to receive 2g 3g 4g signal,another one is support to receive 5g signal,how troublesome it is!
-Callboost can proudly say that our antenna quality is the best on the world,and we have our own antenna factory to control the quality of the antenna.No one can do that like us professional signal receiver.
Electrical specifications | ||||
Frequency range (MHz) | 617~960 | 1710~2700 | 3300~3800 | 4900~6000 |
Polarization | Linear * 4 | |||
Gain (dBi) | 4 | 5 | 6 | 6 |
Horizontal beam width (°) | 360 | |||
Vertical beam width (°) | 80 | 50 | 40 | 50 |
Non-circularity (dB) | / | |||
Isolation (dB) | ≥16 | ≥20 | ≥25 | |
Impedance (Ω) | 50 | |||
VSWR | ≤2.0 | ≤1.8 | ||
Intermodulation IM3 (2×43dBm carrier) | ≤-150dBc | |||
Maximum power (W) | 50 | |||
Lighting protection | DC Ground |
Mechanical specifications | ||
Connector | 4*4.3-10 Female or 4* N-Female | |
Connector position | Bottom | |
Exposed cable size | 30cm (or customer requirement) | |
Height/width/depth | φ350*45 mm | |
Packing size | 410*140*420 mm | |
Weight | 1.3 kg | |
Radome material | ABS | |
Radome color | White | |
Operating temperature | -40~60 ℃ | |
Application | Indoor | |
Mounting | Nut |
1. Drill a round hole Φ36mm~Φ40mm on the ceiling.
2. Match the antenna to the round hole.
3. Fix the antenna onto the ceiling with the screws.
Remarks:
The hole on the ceiling must be slightly bigger than the antenna connector flange,and the antenna base plate should be in close contact with the ceiling,which influences the performance of the antenna.
Send us inquiry to get code for checking the specifications.